All posts by admin

Canon Printer is Offline? Here’s How to Fix it!

Canon printers are known for their incredible performance and cost-effective printing. These printers are highly favoured by users for varied home and office printing needs. However, printing is not always smooth with the Canon printers and issues do arise when printing a task. Canon printer offline is an annoying error in the list that can obstruct you from printing an important document. Luckily, this issue can be resolved with the correct information on the possible reasons and troubleshooting solutions. This post serves the same purpose, which is to make you aware of the possible reasons and resolution of Canon Printer offline error. Let’s proceed further!

What Are the Apparent Reasons Behind Canon Printer is Offline Issue? 

There are multiple factors that can make your Canon printer go offline. It is crucial to know about the possible reasons behind the error before you proceed further to fix them:

  • There is a connectivity issue with your Canon printer.
  • When the printer is in sleep mode.
  • Canon printer error can be closely related to a sluggish Internet connection.
  • A malicious attack from a virus or malware.
  • When printer drivers become unsupportive after updating Windows.
  • A printer in paused mode can also make your Canon printer go offline.
  • Jammed paper in the paper tray.
  • An empty paper tray is also a possible reason behind the error.
  • The hardware, such as loose wire or USB cable can also evoke the error.
  • Corrupt printer drivers can also make your Canon printer prone to offline error.

How Do I Get My Canon Printer Back Online? 

Canon printer is offline message can be annoying when it comes out of nowhere and block you from printing your pictures and documents. Here, you can find some of the relevant solutions that can help you suppress the possible reasons behind the error. Follow them one after the other to check if it resolves the issue or not:

Solution 1: Make Sure That the Connection Between Your Printer & WIFI is Intact

Canon printer offline issue is closely related to the connectivity issue with your printer. First thing first, you need to reconnect your printer with WIFI. Follow the below-given steps to complete the procedure:

  • In the first place, you need to “Forget” the router to disconnect it from your printer.
  • Thereafter, reconnect it with your printer. You may also use a USB to connect them both.
  • Alternatively, you may choose to connect your WIFI printer wirelessly with an Internet router. To do so, you need to open the WIFI Wizard Setup and window on your touch screen printer and connect it.
  • Press and hold the WIFI button on your printer until the WIFI light starts to blink.
  • When the printer starts blinking the blue light, go to your WIFI router and press the WPS button.

Following the above steps carefully, you can get your printer connected with the WIFI again.

Solution 2: Disable the “Use Printer Offline” Feature on Your Computer

Sometimes, your printer shows offline when the “Use Printer Offline” feature is enabled. In such a case, you need to disable this feature on your computer by following the below-given steps:

  • Click the Start button on your PC and then type Control Panel in the search area.
  • Next, you need to select the ‘Hardware and Sound” from the sub-categories list.
  • Thereafter, click on Devices and Printers on the next window that appears on your computer screen.
  • Moving ahead, right-click on your Canon printer and click “See what’s printing.
  • Now select the drop-down menu and then click on Printer from the list.
  • Here, you need to make sure that the Use printer offline option is not check-marked. If the checkbox is marked, uncheck it.
  • Save the changes and then click Cancel all documents.
  • In the end, try connecting your Canon printer again to fix the error.

If the Canon printer is still offline, then move to the next troubleshooting procedure.  

Solution 3: Restart Your Printer Spooler 

The Printer Spooler is an important utility in the Canon printer that handles all the jobs that are sent to the printer. Restarting the printer spooler can fix the Canon printer offline error. The below-given steps can get the task accomplished:

  • On your keyboard, press Windows + R keys simultaneously to open the Run window.
  • In the Run box, type services.msc in the box and click Enter.
  • When the Services window opens, you will be able to locate the list of the Windows services. Click on any service and continuously press P until it highlights the Printer Spooler.
  • Proceeding further, right-click on the Printer Spooler when the drop-down menu appears, and select Properties.
  • Now n the General Tab, select the Stop option located underneath Service status. Click OK to save the changes.
  • The previous step will make the printer spooler deactivated for the time being. You may now delete the printing jobs.
  • To do so, go to the Window Explorer and open C drive.
  • Now follow the given series of action >> Windows >> System32 >> Spool >> PRINTERS.
  • Click Continue when you are asked for permission on the popup message.
  • Now you will see a folder opening on your screen. Here, close the window and go back to the General tab.
  • Again, start the spooler service and set the spooler’s Startup Type as Automatic.
  • In the end, restart your PC and try to print a test job to verify if the error is resolved.

Solution 4: Update Your Canon Printer Drivers

If none of the above-described solutions works on the error resolution, it means that the drivers of your printer are erroneous. In such a case, you need to uninstall the drivers and then reinstall them manually to resolve the error. You may download them from the Canon’s official website and proceed further with the installation steps as given below:

  • Open the Run box (Windows + R) and then open the Device Manager.
  • Now in the submenu, select Print Queues.
  • Moving ahead, right-clicks on the printer hardware and then select the Update Driver.
  • When you see the “How do you want to search for the driver?” prompt on your screen, select- ‘Browse my computer for driver software, and move ahead.
  • Thereafter, you need to choose to install the driver options for the printer by following the on-screen instructions with your full attention.
  • Now update the drivers.
  • Once done, reboot your system and check if the Canon printer is offline error is resolved or not.

Solution 5: Look for the Printer’s Hardware Issues

These are multi-faceted hardware issues in your Canon printer that can make your printer go offline. In such a case, you need to look for the possible hardware issues and fix them by applying the relevant steps:

5.1: Remove Paper Jam 

A jammed paper in the Canon Printer can make it show offline. In such a case, you need to remove the jammed paper to resolve the issue. When removing the jammed paper, you need to consider a few crucial points stated below:

  • When removing the jammed paper, make sure that the printer is turned on. If not, the data being printer will be deleted.
  • Don’t apply excessive force in removing the paper, otherwise, it will be jammed or cause damage to the printer parts. Pull out the paper gently in the right direction with the appropriate force.
  • In case, the paper gets torn, make sure that all the remaining pieces are removed.
  • If you remove the jammed paper without removing the cover, the error message will continue to show up. In such a case, open and close the cover to resolve the issue.

5.2: Low Ink Cartridge       

A low level of the ink cartridge is also one of the apparent reasons that can make your Canon printer go offline. In such a case, you need to hold the printer’s stop/reset button for five seconds. Once this is done, you will no more receive the updates about the printer levels and the Canon printer is offline issue will be resolved.                    

5.3: Check If Your Printer Is in Sleep Mode         

To check if the printer does not have sleep mode enabled, you need to perform the below-given steps:

  • In the first place, go to Control Panel and then select Devices and Printers.
  • Moving ahead, right-click on the faulty printer and select Printer Preferences.
  • Now try to locate the option to disable sleep or time-out mode.
  • Alternatively, you may right-click on the printer and select Printer Properties to find a similar function.
  • Also, your printer’s help guide or manufacturer’s support desk can help you with the error.

Solution 6: Reset Your Printer

Resetting the printer makes it an entirely new printer internally. On resetting, the printer forgets all the settings, including date and time settings and you need to reconfigure it from the scratch. Also, you need to perform the WIFI connection setup from the beginning to resolve the error.

Ending Words! 

Canon printer is offline is undeniably a perplexing error that needs your attention and effort to get resolved. The solutions described in this post can help you in troubleshooting this error. If you need further assistance on this when feeling unease with these solutions, reaching out to an experienced professional can be your best bet. Hope you find this post informative and helpful.

 

 

How to Connect Canon Printer To Wifi

Canon Inc is a Japanese multinational corporation company with headquarters located in Tokyo, Japan. Canon was founded in 1937 and has a specialty in manufacturing optical and managing products such as lenses, cameras, printers, and scanners. Canon is the most famous brand in the imaging sector. Canon has over 850+ distribution channels due to which it has enabled itself in supplying its products across the globe. Today, their offices are present in 148 cities with around 1,84,034 employees performing front-end operations.

With its customer satisfaction level, canon is now able to grab a huge size of the market. Worldwide, when we count on its customers, there will be no citizen who has never used any Canon printer in their entire life.  After having information about canon printers, let’s now discuss the methods and the ways which you can follow to connect your canon wireless printer. So, stay tuned till the end of the article.

Method to Connect Canon Wireless Printer

Don’t you get frustrated when you need to take a printout very urgently and later on you got to know that your printer is in a different room or you have to attach multiple USB cables to get it done? Here, is the reason why it is 100% worth investing some extra pennies in a wireless printer instead of buying a wired printer.

Although, some users usually prefer to purchase wired printers as they think connecting a wireless printer can be a difficult and lengthy process. But the fact is, connecting a wireless printer is not a big deal, but sometimes it can become frustrating when you don’t know how to start the process. So first, let’s have a look at the methods which you follow to connect your canon wireless printer.

  1. WPS Connection to connect Canon Printer with Wireless network
  2. Connecting Wireless printer on windows
  3. Connecting canon wireless printer on MAC

So, let’s discuss in depth about each method.

WPS Connection – To Connect Canon Printer with Wireless Network

Now, to start connecting your printer with the wireless network, first make sure that your WIFI is working and has a WPS button. Also, make sure that your printer is actively using WPA or WPA2 security protocol.

After onwards, here are the steps that you can follow to connect the canon printer with a wireless network.

  1. Now, to commence the process, plug the printer’s power cable into the main socket and turn it on. Then the 3” display screen will show the Canon logo.
  2. Now, on your display screen, you can see multiple options on the screen. There, search for the WIFI icon and tap on it.
  3. Then go to “LAN Settings” which will be available at the bottom of the screen.
  4. Then you will see a list with three options and from that, tap on the “Wireless LAN” option.
  5. After that click on “Wireless LAN Setup” and then “Manual Connect”.
  6. Then, it will automatically start its search for all wireless networks available at that specific location.
  7. Now, tap on your WIFI name, and then it will ask you to type the password. There, you can use the shift and the numeric keys to enter Capital words or numeric values.
  8. Once you have typed the password, then tap on OK.
  9. Again tap on OK to connect your Canon printer with the WIFI.
  10. It will take a few seconds, later on, the screen will display “Connected to the Wireless Router”.

How to Connect Canon Wireless Printer to Windows

Once, you have connected your wireless printer with the WIFI, the next step is now to get your wireless printer connected with your PC. As soon as you will get your printer connected, the soon you will be able to take the first printout. First, let’s discuss how to connect a wireless printer to windows, and later on, we will also cover the same for MAC as well. So, here are the steps that you can follow to connect the canon wireless printer to Windows.

Step 1. In the first step, you have to download the canon’s printer driver which you can access by visiting https://ij.start.canon/.

Step 2. After that, it will ask you to type your canon printer’s model number in the insert box, and after that, click on the “Search” option.

Step 3.  It will show the driver that is compatible with your canon printer.

Step 4. Then, click on the “Download Driver” option available in the green color box.

Step 5. Now, the downloading will start and double click on that downloaded file, and follow the on-screen instructions to complete the installation process.

Step 6. Go to the search bar available on the taskbar of your desktop.

Step 7. Then in the insert box, enter “Printers and Scanners” and click on that.

Step 8. On the settings page, click on the “Add a printer or scanner” option and also switch on your canon printer.

Step 9. Now, it will show all the available printers to your location and once you see your canon printer model number in that list, click on the “Add Device” option.

Congrats! Now your printer is ready to print from your Windows PC. Now, let’s discuss the same for Mac users.

How to Connect Canon Wireless Printer on MAC

You can easily get your canon wireless printer connected on MAC through the WIFI Protected Setup (WPS) or by Bluetooth connection. So, here are the steps that you can follow to connect the canon printer.

Step 1. On the home page screen of your MAC, click on the apple icon available in the top left corner.

Step 2. Then go to system preferences and click on “Printers and Scanners”.

Step 3. After that click on the “+” sign available below the page.

Step 4. Now it will show all the available printers on the page.

Step 5. After that, select your Canon printer.

Step 6. Then, it will ask you to download the software and install it by following the on-screen instructions.

Now, your MAC is connected with the canon wireless printer and is now ready to take the printouts.

You can also download the printer driver from the official website of canon, as mentioned in the second method of connecting the wireless printer with windows.

Also, note that, if the printer and the MAC are connected on the same WIFI network, then you can easily get it connected.

Summary

In this article, we have covered all necessary and important information about Canon printers and how to connect them to WIFI and with windows or MAC. You can easily follow the above-mentioned steps one by one to connect your printer. In case, if you like the content, then do share it with your friends or family members who are going to purchase the canon wireless printers in the future. So that, they will be updated in advance on how to connect your Canon printer wirelessly. Also, if you are looking to purchase a canon printer then you can easily get it purchased from the official store of Canon near your location. Canon’s store details are available on its official website.

Thanks for reading this blog on the methods of connecting wireless Canon printers till the end.

Canon Printer Not Printing

Canon Printer is one of the renowned printer brands in the market that is making its place into commercial and domestic spaces to offer the best quality of printing service. Being one of the best printing brands, Canon Printer earned a huge customer base in different corners of the world. Printer means Canon Printers.

With each and every technical product, it’s not a big deal to face some major or minor issues and the same goes with the Canon Printer. Canon Printers often report why is my canon printer not printing or why is my canon printer not printing color. Are you also encountering the same problem with your canon printer? If yes, then there is nothing to worry about aas we are here to resolve all your concerns and queries related to theCanon Printer Problems in just a few clicks of the button. We have a team of experienced Canon Professionals who have immense knowledge about Canon Printers and Canon Printer Problems as well. So, let’s get started without wasting even a single minute. Make sure that you read this post till the very end to effectively resolve your canon printer not printing color correctly!

Methods to Fix “printer is not printing correctly” Canon Printer Problem:

This issue “why is my canon printer not printing” can be occurring due to any of the reasons and conditions

Solution 1: Set Canon Printer as Your Default Printer on your Device

Here is the step by step guide that you need to follow till the very end to make sure that you are not left with why is my canon printer not printing the right colors issue. So, let’s start!

Step 1: Navigate to the Control Panel of your device as clearly visible in the below given image.

Step 2: Now, press the “Devices and Printers” option available on your computer screen.

Step 3: In the list of available printers, you need to ensure that you are putting Canon Printer as your default printer.

Step 4: If you find that the Canon Printer is not set there as the Default Printer, then right click on the Canon Printer option and select the “Set as Default” option to set canon printer as your default printer.

Step 5: Even after setting the Canon Printer on your device as the default printer, you need to make sure that your canon printer is marked with a Green Tick.

Also Read: Setup IJ Start Canon

Solution 2: Change your Printer Status from Offline to Online

It is also possible that your canon printer won’t print color because your printer status is offline instead of online. So, let’s take a look at how you can change your printer status from offline to online!

Step 1: Type Control Panel in the windows search option.

Step 2: Navigate to the Control Panel window to check out the list.

Step 3: From the list, click on the “Devices and Printers” option.

Step 4: Locate yourPrinter type from the printer catalog appearing on your device and then right click to choose the ‘See what’s printing’ option.

Step 6: Here, you need to check that your printer is not selected with the offline option and if you find a tick sign on the offline option, then uncheck to go online.

Also Read: Setup IJ Start Canon TR4500

Solution 3: Remove Printing Tasks Set in Printing Queue

There is a high chance that you are facing this issue because the printing task that you queued is stuck in between and is now creating trouble and that’s why you are facing canon printer not printing issue. So, follow the listed below steps to successfully remove the printing tasks set in the printing queue.

Step 1: Navigate to the Windows Search Option of your device and input control panel.

Step 2: Input services.msc in the field and hit the Enter button on your keyboard.

Step 3: Go to the Services window, scroll down and find the Print Spooler and click on ‘Stop’ after right clicking on it.

Step 4: Open the Run Box once the Print spooler service is stopped on your device.

Step 5: Input Spool in the field and hit the enter key.

Step 6: Open the Printer folder of your device.

Step 7: Delete or Remove all files from this folder.

Step 8: After deleting all the files, close the spool folder.

Step 9: Now, go back to service windows and right-click the print spooler program and click on the ‘Start’ option.

Step 10: Now, try to print with your canon printer to check if the issue got resolved or not.

Also Read: How to Reset Canon Printer?

Solution 4: Update the Printer Driver with the latest version

It is also possible that your printer is facing canon printer not printing black properly due to an outdated printer driver in your canon printer. So, we will advise you to update your printer driver with the latest version to resolve this issue and then check if the issue got resolved or not. If not, then depending on the situation, we have more solutions for you

Solution 5: Disable the Firewall Protection Temporarily on your Device

There are chances that the firewall protection on your device is acting as an obstacle to deliver printing service properly. So, you are advised to temporarily disable the firewall protection on your device. Follow the listed below steps to do so!

Step 1: Go to the Search Bar and type ‘Windows Defender Firewall’ and click the enter key.

Step 2: Click on ‘Turn Windows Defender Firewall on or off’ option to disable the firewall protection.

Step 3: On both public and private networks, disable the firewall.

Step 4: Click Ok to save the changes that you have made in Firewall.

Solution 6: Check the Status of Print Spooler

Step 1: On the Run Box Window, input the Control Panel.

Step 2: Input “services.msc” and click Enter Key.

Step 3: Scroll down to the bottom to find the printer spooler option and then click on properties option.

Step 4: From the top, click on the General Tab. Navigate to the Service Status and click Stop and then OK.

Step 5: Change the Startup type to Automatic and then click OK to save the changes.

Step 6: Click Start and then OK.

Step 7: Restart Your Printer and now check for the status of printing.

Final Takeaways!

Above we mentioned around 6 solutions depending on the situation of your Canon Printer Problem. We hope that we helped you to resolve canon pixma printer not printing color issue of your printer. Even after trying out all the ways, if you feel that you failed to resolve the canon printer won’t print color issue, then you are advised to get in touch with our Canon Printer Experts and they will help you to find the best solution to resolve the Canon Printer Not Printing issue in real time. They will provide dedicated assistance that can help you to fix the issue in real time. Connect with Canon Printer Experts Now!

How to Reset Canon Printer?

Wondering how to reset a Canon Printer? Well! There is not one but many ways to get the task accomplished. Canon printers are one of the most popular printers among users, thanks to their incredible features for home and office printing. However, Canon printers also give an error when you are using them for different tasks, such as print, scanning, and copy. In some cases, you may need to reset your Canon printer to keep the errors at bay. Sometimes resetting your Canon printers becomes a demanding task due to the consistent development of the program and user interface. Worry not! If you want to perform your Canon printer reset, we will guide you with handy ways to reset your Canon printer. Let’s start!

 Different Methods to Reset Canon Printer

There are various instances when you may need to reset your Canon printer. In such cases, you have different ways of resetting the printer. Resetting your printer can bring it back to its normal functionalities in case of error. Besides, it also resolves multitudinous errors in your Canon printer that may prevent you from printing smoothly. The list may include, slow printing, the printer becoming unresponsive, or getting online. Below are some of the most common techniques to reset your Canon printer with the utmost ease:

  1. Power reset of Canon printer
  2. Ink reset of Canon printer
  3. Hard reset of Canon printer
  4. Resetting Pixma Printer
  5. Factory reset of Canon Printer

Now that you know the basic methods of Canon printer reset, let’s discuss further how these methods actually work.

Also Read: Setup IJ Start Canon

1: Power Reset of Canon Printer

Power reset is a soft resetting of your Canon printer; however, can fix the problem in several cases. Below are the steps to perform the power reset of the Canon printer:

  • First of all, turn your Canon printer off and then remove the power cable from the power source.
  • Now make sure that your device is disconnected before proceeding any further.
  • Next, reconnect the power cable to the power source and turn your printing device on.
  • Once started, connect the printer to the ethernet cable.
  • In the end, print a test job to verify that your Canon printer is working fine after the power reset.

2: Ink Reset of Canon Printer

Inkjet Canon printers have inbuilt chips that notify the users to fill the ink when the cartridge is running low on it. When you replace the ink cartridge in your Canon inkjet printers, it leaves detrimental effects on the normal printing operations. In such a case, ink resetting of the printer can keep printing issues at bay. Follow the below-given steps for ink reset: 

  • In the first place, remove the ink cartridge of your Canon printer.
  • Next, insert the cartridge into the main channel of the ink resetting system.
  • Moving ahead, make sure that the chip on the ink cartridge is in working condition and is in proper contact with the plate on the resetter.
  • Hold the ink cartridge softly until it flashes the LED light on the chip resetter. Don’t leave it until the light becomes steady.
  • After that, remove the cartridge from the chip resetter and perform the same steps on any ink cartridge that needs to be reset.
  • In the end, install the cartridges in the erroneous Canon printer and check if the error is resolved or not.

3: Hard Reset of Canon Printer

The hard reset can help you to bring your canon printer back to its default factory settings. Here’s how:

  • In the first place, click the Stop button and your Canon printer will ring an alarm. Once it flashes or rings at least 19 times, release the Start button.
  • The hard-reset canon printer procedure is finished.
  • Now you need to uninstall the printer’s drivers and then reinstall them to the latest driver version available.

4: Reset Canon Pixma Printer Using Default Factory Setting

Below are the steps that can help you with your quest on how do I reset my canon printer to factory settings:

  • Turn your Canon Pixma on and then locate the Device Settings from the menu.
  • Click OK and then select the Resetting option.
  • Again, click OK and it will initiate the printer’s resetting process.
  • Once done, turn off your Canon Pixma printer and hold the Stop button along with the power button of the device.
  • After that, release the Stop button and then press the Stop button twice more when holding the Power button.
  • Wait up to 30 seconds until you see “O” on your printer’s screen.
  • Hereafter, press the Stop button 4 times.
  • Now press the Power button two more times.
  • Press the power button again to turn your device off and the Canon Pixma reset process is completed.

Now that you know how to reset canon Pixma printer, let’s move to the next procedures.

 5: Factory reset of Canon Printer

There are different ways to factory reset your Canon printer, such as hard reset canon printer. There are instances when you are left with no option, but to reset your Canon printer. Restoring your Canon printer to the default factory setting can resolve most of the problems in the device. Below are the steps to perform the factory reset of your Canon printing device:

  • First of all, press Setup on your Canon printer.
  • Next, go to the Device settings using the arrow key and then click OK.
  • After that, navigate to the Reset setting and hit OK.
  • Moving ahead, go to the Reset all option and press OK.
  • Select Yes, and the procedure of the factory reset is completed now.

Also Read: Setup IJ Start Canon TR4500

Use the Stop and Power Buttons to Reset the Canon Printer
This is yet another quick and easy remedy that is well worth trying. Again, no software is required.
The steps are as follows:
1. Check to see if your printer is turned on and linked to your computer.
2. To switch off your printer, press the ‘Power’ button.
3. For 2 seconds, press the ‘Stop’ button.
4. Hold down the ‘Stop’ button while pressing the ‘Power’ button for 2 seconds.
5. Press and hold the ‘Stop’ button.
6. Press the ‘Stop’ button 5 times while holding down the ‘Power’ button.
7. Press and hold the ‘Power’ button.
Your printer has now been reset.

Reset Ink Cartridges in Canon Printers

Reinstalling Canon ink cartridges is frequently enough to reset them. However, you may need to reset the cartridge on occasion.
There are a few ways to reset the Canon ink cartridges, depending on your printer type.

A. Using the Power Button, reset the Canon ink cartridge

The power button is typically used to reset a Canon printer’s ink cartridge.
This is how:
1. Turn your printer off.
2. Press the ‘Power’ and ‘Stop’ buttons at the same time.
3. Press and hold the ‘Stop’ button.
4. Take a few moments to wait.
5. Press the ‘Power’ and ‘Stop’ buttons simultaneously one more.
6. Double-click the ‘Stop’ button.
7. After 30 seconds, the screen will display ‘0’. Four times press the ‘Stop’ button.
8. Double-click the ‘Power’ button.
9. For the third time, press the ‘Power’ button. The printer is now switched off.
10. Disconnect the USB and power cords from the printer.
11. To open the ink cartridge door, press the ‘Power’ button.
Connect the USB and power connections again.
13. Release the ‘Power’ button and close the ink cartridge door.

B. Canon Ink Cartridge Reset The Chip in Action

A chip can be used to reset the ink cartridge on a Canon printer.
The steps are as follows:
1. Open the door to the ink cartridge.
2. Take the ink cartridge out.
3. Insert the cartridge into the main resetter channel, ensuring that the chip of the cartridge is in contact with the resetter contact plate.
4. Keep the cartridge in place for a few moments. When contact is made, the resetter’s LED light flashes a few times.
5. Remove the cartridge once the light has stopped flashing and is steady.
7. Replace the cartridge in your printer.
C. Canon Ink Cartridge Reset How to Use the Color Start Button
The Color Start button on Canon Pixma Series All Models can be used to reset the Canon ink cartridge.
This is how you do it:
1. Ensure that your printer is turned on.
2. Hold down the ‘Reset’ and ‘Color Start’ buttons at the same time.
3. Keep your hands on them for 5 seconds.
4. After 20 seconds, release both buttons.
5. Press the ‘Tool’ button when you see ‘1’ on the display.
6. The letter ‘A’ will now be visible. Simultaneously press the ‘Tool’ and ‘Reset’ buttons.
7. Release both presses once the lights have stopped flashing.
8. Shut down the printer.
9. Press the ‘Power’ and ‘Reset/Stop’ buttons simultaneously.
The Power LED will illuminate. While pressing the ‘Power’ button, push the ‘Reset’/’Stop’ button twice.
11. Let go of both buttons. Now the printer is in servicing mode.
12. The LED lights will change to a green color. ‘Stop’ or ‘Reset’ the computer.
13. Once, press the ‘Orange’ button. (Test print for service)
14. Twice press the ‘Green’ button. (Information from EEPROM)
15. Three times press the ‘Orange’ button. (Initialization of EEPROM)
16. Four times press the ‘Green’ button. (Resetting the waste ink counter)
17. Five times press the ‘Orange’ button. (Settings for destination)
18. Six times press the ‘Green’ button. (Both black and color print heads require serious cleaning.)
Your ink cartridges should be reset at this point.
3. Use the Setup Option to Reset the Canon Printer (Factory Reset)
This approach returns your smartphone to its factory default settings.
Resetting your Canon printer to factory settings restores the machine to its original state.
The steps are as follows:
1. Select ‘Setup’ from the menu.
2. Navigate to and choose ‘Device Settings’ using the arrow buttons.
3. Press ‘OK.’
4. Using the arrow buttons, scroll to ‘Reset Setting.’
5. Press ‘OK.’
6. Select ‘Reset All’ from the drop-down menu.
7. Press ‘OK.’
8. Select ‘Yes.’
9. Press ‘OK’ once more.
The factory settings for your Canon printer will now be restored.

 To Summarize the Above!

The procedures described in this post can help you on how to reset a Canon printer when it becomes essential for error resolution. It explains different ways to get the job done as per a given situation. If you are having trouble with “how do I reset my canon printer to factory settings?” get in touch with our Canon experts and elaborate your issues in detail. Based on your problem description, they will guide you with the most relevant Canon printer reset solutions. 

 

Setup IJ Start Canon TR4500

IJ Start Canon TR4500 Setup is an important task for Canon TR4500 series printers. If you want to reap the benefits of the Canon TR4500 printers, you need to set up its printers and software. TR4500 series of the Canon printers can print to a resolution of 4800 dpi (horizontal) x 1200 dpi (vertical). Besides, high-speed USB ports and LAN ports can be used at the same time with the printer’s interface. You can utilize it for different types of printings, such as borderless printing, standard printing, and auto-duplex printing. Here, we will discuss some important aspects of the Canon TR4500 printer setup, unboxing uses and more. Let’s start!

Configuration Methods of IJ Start Canon TR4500

Canon printers can be configured in several methods. For instance, you can use configuration methods to set up your IJ Start Canon TR4500 with a USB cable or Wi-Fi. Technology has undergone different modifications and developments recently and brought one of the smart printers, i.e., IJ Start Canon TR4500, with amazing features. The three convenient methods are detailed below to sync your IJ Start Canon Printer TR4500 with your computer. Let’s go through them one by one.

Step – 1 Set up IJ Start Canon TR4500 Printer via USB Port

  • Visit the manufacture’s website and download the compatible drivers
    Then, establish the printer drivers of your computer
    Now, move to the Devices & Printers option on your system. Then, select your printer name from the list
    Choose the connection method when it appears in the next window
    Now, couple the USB cable to your printer for Canon TR4500 set up
    Then, switch on your printer and wait for its coupling
    Once completed, test the print screen display. For that, tap on Start and test the prints taken from IJ Start Canon TR4500.
    Once you follow the above points, you can easily configure your Canon TR4500 printer with your PC via a USB port or Wi-Fi.

Step – 2 Configure Canon TR4500 Printer Wirelessly

Couple your printer to the system wirelessly for IJ Start Canon TR4500 synchronization. Select the Wi-Fi connection at this point and activate print drivers to begin setting up. Let’s focus on some points that are mentioned below to set up the Canon TR4500 printer.

  • Switch on the Canon TR4500 printer and tap the Menu or Wireless button. Grip it for three seconds
    Confirm that Wi-Fi is enabled on your IJ Start Canon TR4500 printer. Now, move to your system for Canon TR4500 synchronization
    Download the Compatible driver’s file and activate them on your system from the manufacturer’s official website
    Now, tap Next on the Start Set up screen
    Then, type the Username & Password on the next screen
    Choose the Start Setup option and tap on the Next button
    Select the Region and tap on the Agree in the Information Request screen
    Press on the Yes option on the Check Connection Method screen
    Once the pop-up appears, tap on the Allow button
    Now, add your printer from the list of devices and test a print page.
    After applying these methods, set up a connection between both the devices using your Wi-Fi. IJ Start Canon TR4500 can print, scan and perform other jobs on your system.

Step – 3 Setup IJ Start Canon TR4500 Via LAN Connection

Use the LAN connection to configure IJ Start Canon TR4500. You can also apply the Wireless Direct option to connect IJ Start Canon TR4500 with your PC. A few easy steps are given below to configure IJ Start Canon TR4500 with your computer.

  • Confirm that your Canon printer is switched on. Then, press the Setup button on the Operational panel
    Select the Device Settings option
    Choose the LAN Settings option
    Press on the Wireless Setup option
    Tap on the Ok button
    Choose the Switch WL Direct on the next screen
    Once completed, press on the Done and Ok button
    Now, resume your device and allow the synchronization of Canon printer TR4500
    Choose the printer with DIRECT
    Then, type the appropriate credentials when requested.

Also Read: Steps to Setup Canon Pixma TR4520 Printer

IJ Start Canon TR4500 Unboxing Setup  

The Canon PIXMA printers are packed securely to prevent wear or tear damages during shipment. Once bought, you can unbox the setup by following the below-given steps: 

  • First of all, open the package carton using a scissor or knife and check if all the delivered supplies are intact. 
  • Next, take the printer out and place it in an area that is well ventilated and dust-free. 
  • Remove away the protective tapes on the printer. 
  • Insert the power cable at the back of your printer and then connect It to a power supply. 
  • Now turn the Canon TR4500 Printer On and configure the basic settings. 
  • Next, open the rare tray and fill it with a stack of paper and then close it. 
  • In the end, you need to install the cartridges in the specified slots. 

The IJ Start Canon TR4500 unboxing setup can be completed using the above-listed steps. 

IJ Start Canon TR4500 Uses 

IJ Start Canon TR4500 can be used to carry out different functions. You can copy the original documents. Besides, you can add the copying job in Canon TR4500 and get the copies in colour and black and white. Scanning is also one important function that helps users convert hard copies into soft ones. To utilize the IJ Scan utility, you need to install the MP Driver on your system in the first place. You may utilize various software to start the scanning process. 

Furthermore, you can also utilize IJ Start Canon TR4500 Fax feature after setting up your printer. To do so, you need to connect the printer to a telephone line. When doing so, you need to make sure that the power supply remains unhindered until the completion of the fax operation. In case of power loss, all the fax data stored in the printer’s memory will also be lost. 

How to Print on IJ Start Canon TR4500?

If you want to print using the IJ Start Canon TR4500, below are the steps:

  • Firstly, move down the front lid slowly and then move out the cassette until it stops.
  • Next, slide the paper width guides and then load paper into it.
  • Moving ahead, adjust it according to the size of the paper.
  • Now move the cassette back into the Canon TR4500 Setup and it will open the Paper Information screen.
  • Select the paper size and type by pressing the right & left arrows.
  • Enter the password in the specified area to proceed further and click OK.
  • Again, tap OK on the screen.
  • Go to your computer and install the Canon Pixma TR4500 Setup driver.
  • Launch the Pixma driver installer and choose the suitable on-screen prompts.
  • When on the connection screen, select Wireless and move ahead according to the prompts.
  • Once the driver is installed, you may print your documents wirelessly.

Also Read: How to Install Canon G2010 Printer

Copy with IJ Start Canon TR4500

You can copy the original documents using the IJ Start Canon TR4500 by following the below-given steps: 

  • Turn the printer’s power on and then open the front lid.
  • Now slide the cassette out and ensure it is fully out of the printer. 
  • With the print side down, you need to load paper in portrait orientation.
  • Adjust the paper guides so that the paper size fits correctly to the printer.
  • Hit the OK button when the Paper Registration screen appears. 
  • Assign the paper type and size using the right and left arrow buttons.
  • Load the original document after opening the scanner lid. Make sure that the print side facing down. 
  • Hit the Copy button and close the scanner lid with the utmost care.
  • Again, check the paper settings and press the Color or Black button.
  • Following the above-given steps will make the printer copy the original document. 

How to Add Copying Job in Canon TR4500?

To add the copying job in Canon TR4500, you need to follow the below-listed steps: 

  • Make sure that the ij.start.canon TR4500 printer is turned on before proceeding any further. 
  • Now you can perform the copying and printing of the original document. 
  • Make sure that the paper has no pins or staples. 
  • Put the original document on the platen and wait until a new page with the message Color Copying [Start]Scan page appears.
  • Here, press Black or Color to get the copies.
  • Finally, take out the printer sheets from the output tray of the Canon TR4500 Setup.

You can get the task accomplished using the above-given steps.  

How to Scan on IJ Start Canon TR4500?

The below-stated steps can help you to utilize the scan utility of the Canon TR4500 series printers: 

  • First of all. install the MP Driver on your PC and then open the IJ Scan Utility.
  • From within the Settings, open your Settings dialogue box. 
  • Now click on the Scan mode to proceed further. 
  • Next, modify the Scan options on the software.
  • Rename your file and save it to a suitable location.
  • Go to the Application Settings tab and choose an application to open.
  • Hit OK and save the changes in the settings you have made.
  • In the end, select Scan and it will initiate the scanning process.

How to Fax on IJ Start Canon TR4500?

To utilize the fax utility:

  • First of all, connect the printer to your phone line and choose how you want to receive the faxes.
  • Turn your printer’s power on to start the setup procedure. 
  • Now from within the printer’s control panel, hit the SETUP option. 
  • Select a suitable option using the arrow keys and then press FAX SETTINGS. Hit OK after making your selection. 
  • After that, press the EASY SETUP option and then START SETUP.
  • Now connect the Canon TR4500 Setup to the wall outlet and the computer using a power cord.
  • Hit OK and perform a connection test to verify that the connection is intact. 
  • Moving ahead, perform the below-given series of actions: 
  • SHARING FAX/VOICE >> Receive mode TEL Priority >> Telephone Line Type Tone >> OK.
  • You can complete the Fax receive setup using the above-listed steps. 

Also Read: How to Setup Canon Pixma TR7520?

IJ Start Canon TR4500 FAQs

IJ Start Canon TR4500 Printer Not Working. How to fix it? 

You may notice that your IJ Start Canon TR4500 Printer has stopped working. There are several possible reasons behind the error, such as a damaged power cable. In such a case, check the cable for possible damages. Replace it if the damage actually exists. Besides, if the list of the available devices is missing in the Canon TR4500 Setup name, uninstall and reinstall the printer driver. Make sure that the installed driver is updated to the latest release. If the drivers are corrupted, they will not show the printer’s name. 

Solve IJ Start Canon TR4500 Not Printing Issue

Facing Canon printer not printing issue. There are multitudinous reasons that can give rise to this problem. To resolve the issue, you need to suppress the apparent reasons behind the error. For instance, if the Canon TR4500 printer is unable to connect to the system, you need to check if the USB cable is working properly. The USB cable should not exceed the 3m length. An inadequate power supply is also one of the possible reasons behind the problem. In such a scenario, do not connect multiple devices to the port as it may result in an inadequate power supply and keep the issue at bay. 

If your printer can’t connect to a wireless network, reduce the unnecessary objects that can reduce the signal strength between the printer and the router. Besides, removing all the metal objects between the devices can also improve the signal frequency.

How do I connect my Canon TR4500 printer to my computer?

If you are having trouble connecting your Canon TR4500 printer to the computer, consider the below-given points: 

  • If You are having a connection issue between the printer and the computer, connect the cable to a different USB port. 
  • If the printer is connected to a hub, remove it and then connect it to the computer directly.
  • Also, make sure that the printer is connected to a proper port.

Once done, try to print a test job to check if the connectivity issue is resolved or not.

Canon TR4500 Scanner Not Working

If you are having trouble using the scan utility in IJ Start Canon TR4500 Scanner, check the below-given steps: 

  • Before you proceed any further, make sure that the printer is in an active state.
  • Also, verify if the drivers are installed properly. If not, install it using CD-ROM.
  • Save the scanned files and pictures in the IJ Scan Utility to open them in your application.
  • If your Canon printer is connected to multiple computers, locate and choose Canon TR4500 from the list. Additionally, make sure that the printer’s name in the list is correct.  

Keeping the above-given considerations in your mind can prevent you from experiencing the Canon TR4500 Scanner problem not working error when printing.

How do I reset my Canon TR4500 printer?

From within your Canon printer, you can access the factory reset option. This option enables the users to return all the settings to the factory stipulations. Once the reset is done, it requires you to reconnect to your network and complete the setup process again. 

Why is my canon TR4500 printing blurry?

If you are using your Canon printer after a long time for printing, it might yield a blurry or unclear outcome. To fix this, check the below-given points: 

  • Corrupt drivers can bring blurry printouts. To fix this, update your printer drivers to the latest release. 
  • Sometimes, if the printer’s repository does not have sufficient ink, the print outcomes will be blurry or unclear. Check the ink levels and make sure that it is enough. 
  • The print head nozzles often tend to get choked if the printer remains unused for a considerable period of time. Clean the nozzles for clear printing. 

Performing these steps can help you in problem resolution. After checking the listed points, print a test job to check if your printer is now yielding clear print-outs. 

Why is my Canon printer canon TR4500 Offline Windows 10?

Canon TR4500 Offline Windows 10 error is closely related to a faulty or outdated printer driver. If you are getting Canon Printer Goes offline Windows 10 status when trying to print, you make sure that the printer drivers are working fine. Also, check if you have installed the correct printer driver on your system and it is updated to the latest version. Mac users also confront a similar issue when their Canon Printer appears offline. Connectivity issue is also one of the most apparent reasons behind the error. Check these factors to get rid of the error. Alternatively, you can connect with our Canon printer experts to get instant resolution. 

Why is my Canon printer not printing anything?

There is a myriad of reasons that can prevent the Canon printer from printing anything. Some of the main reasons behind the error are stated in the below-given list: 

  • When the ink tank is empty. 
  • Improper installation of the ink tank. 
  • Undesired print jobs that remain in the queue. 
  • Improper placement of the CD/DVD in the CD-R tray. 
  • When the machine is not ready to print. 
  • Improperly connected machine to the computer. 
  • The machine is not selected in the printer driver. 

When any error occurs in the printer, you need to perform the relevant troubleshooting solutions to resolve it. However, if you are not sure about the procedure, get in touch with our professional Canon technicians. 

 

How To Setup Canon Pixma TR4520 Printer

Canon Pixma TR4520 setup is an essential process that helps users to utilize its excellent features. When you buy your Pixma TR4520 for your printer, it involves various procedures before you finally make it ready for the final printing. The steps may include, unboxing & setup, installing drivers & software, understanding its various functions, such as print, copy & scan, and various others. Besides, updating your printer driver to the latest version keeps it functioning in an optimal manner. To understand these important procedures in Canon Pixma TR4520, read this post until the end.

About Canon Pixma TR4520

Pixma TR4520 is one of the top-rated printers from Canon, which is highly preferred for light-duty printing needs. It is mostly favored by the home-based office printing uses that doesn’t require heavy-duty printing. However, the printer comes with the robust features that can print efficiently and yield excellent quality print outcomes and photos. The printer’s lid is spacious enough to accommodate slightly thicker items, such as magazines and books. Furthermore, it can also perform long scanning for a multi-page document, thanks to its automatic document feeder (ADF). Now that you are familiar with the printer, let’s proceed further to the Canon TR4520 wireless setup and other important procedures.

IJ Start Canon TR4520 Setup: Unbox and Setup

When you purchase your Canon Pixma printer, you need to unbox it and set it up for the printing the documents. Below is the Canon TR4520 manual that can help you in setting the printer in easy steps:

  • Check your printer model and download the suitable drivers from the printer’s official website.
  • Next, run the setup file in order to install it on your operating system.
  • Now complete the installation procedure by following the on-screen prompts with an absolute attention.
  • During the installation procedure, you will get the option to choose the option to connect. Here, choose USB as your connection method.
  • Now, use a USB cable to connect your Canon Pixma TR4520 to your OS.
  • Once done, wait for the connection to establish and change it in case you want a different connection method.
  • Try to open a printable document to check if the connection is established successfully or not.

Furthermore, you can also perform canon pixma tr4520 fax setup and utilize the fax function on your device. If you are nor sure how do I connect my Canon Pixma TR4520 to my iPhone, get relevant assistance from our chat crew.

IJ Start Canon TR4520 Setup: Manual and Driver Download

Below are the steps for your Canon TR4520 setup download:

  • Open your default web browser and go to Canon’s support page.
  • Next, enter your Canon printer model and click on GO.
  • Moving ahead, click DRIVERS & DOWNLOADS when the next window appears.
  • Thereafter, you need to select your Language and Operating Systems by clicking on the respective drop-down menus.
  • Click Select next to the suitable driver located underneath Recommended Driver(s).
  • Moving further, hit Download button and save the downloaded driver to your PC.
  • Proceeding further with the driver installation, check the License Agreement and hit Yes.
  • Click Yes when the next window appears.
  • Wait until the installation completes and then connect your Canon Pixma TR4520 to your PC and start printing.

You can also perform Canon Pixma tr4520 setup mac procedure and manage your printer with your Mac device.

Also Read: Steps to Setup Canon Pixma TR4520 Printer

IJ Start Canon TR4520 Setup: Print Process

Below is how you will perform your Canon Pixma TR4520 Setup for the print process:

  • Power on your printer and open the input tray.
  • Once open, you need to place A4 sheets in the tray.
  • Also, check the alignment of the sheets to make sure that they are correct.
  • Now download and install the required drivers based on your printer’s model.
  • Moving ahead, choose the important print settings.
  • After that, click Apply to save the changes you have made.
  • Also, choose the paper size and other features in terms of their values.
  • Furthermore, you can also choose the printing quality.
  • Once all the settings are changed, your printer will do the printing according to the existing settings.

Canon PIXMA TR4520: Copy Process

Canon Pixma TR4520 also offers the copy process. To set up the copy process in the program, you need to follow the below-given steps:

  • Turn your Canon printer on the follow the on-screen instructions to complete the primary setup procedure.
  • Now enter the number of sheets to be placed in the input tray.
  • Place the original document on the scanner bed.
  • Click the Copy option and select your preferred color.
  • Next, you need to define the number of copies based on your need. Additionally, you can choose the copy standards as well.
  • Now click OK after the doc preview.
  • You may also choose to stop the process simply by clicking on the Stop button.
  • Once the process is completed, move out the original copy of the document.

Also Read: How to Install Canon G2010 Printer

IJ Start Canon TR4520: Wireless Connection

If you want to establish wireless connection for your Canon TR4520 on your mobile device, the below-listed steps can help:

  • Turn on your printer and click on Settings.
  • Next, use the navigation buttons to explore the Device settings option.
  • Click OK to move ahead.
  • Locate LAN settings and click OK.
  • Again, go to the Wireless Direct option using the navigation buttons and hit OK button.
  • After that, confirm the Wireless Direct settings and you will see a Done message on your screen.
  • Now look for the Security protocol and click OK to confirm.
  • Jot down the printer’s WiFi password to finish the task.

IJ Start Canon TR4520: Wireless Direct

You can set up your Canon Pixma TR4520 wirelessly using the Wireless Direct option. Below are the steps:

  • Turn your Canon printer on before you proceed any further.
  • Next, you need to perform the alignment process.
  • Now from within your LAN settings, click Wireless Direct option to turn it on.
  • Proceeding further, finish the setup procedure on the system.
  • Follow the on-screen instructions to install the drivers.
  • When setting up, you will get the option to choose the connection type. Choose Wireless to finish the task.
IJ Start Canon TR4520: Network Device Setup Utility

IJ Network Device Setup Utility is a crucial software application that lets your PC communicate with your printer. Besides, this utility on your PC lets you perform the basic settings. The list may include entering the printer IP address or selecting the network frame type.

  • First of all, download the file to start the procedure.
  • Now change the settings for the location where the file is saved.
  • Moving ahead, double-click the downloaded EXE file to decompress it.
  • Now the installation procedure will start automatically.

Caution: If you are trying to configure the wireless LAN using USB cable without installing the printer driver, it may evoke an error. In such a case, execute again after waiting for a while.

IJ Start Canon TR4520: Firmware Update

Below are the steps to perform the firmware update for your Canon TR4520 printer:

  • Make sure that the printer is turned on.
  • Next, confirm that your printer is connected to a stable Internet.
  • Moving ahead, load one sheet of A4 size or Letter size plain paper.
  • After that, hold the stop button and wait for the Alarm lamp to blink 6 times and then release the button.
  • Printing will start as per the network setup information.
  • Launch your default Internet browser on your device. Enter In the text that you see on the printout in the “IPv4 IP Address” line in the search box.
  • The previous step will display the top window as the Remote UI starts.
  • You need to select the [Firmware update] and [Install update].
  • Wait for the “Update succeeded” message to appear on your screen and then click OK.

Final Words!

The steps incorporated in this post can help you in IJ Start Canon TR4520 printer setup and utilizing its important functions. However, if you are getting issues during the setup process or getting error messages, such as “canon tr4520 won’t print”, get in touch with our experienced technicians. They will help you with the best solutions.

Related Blogs –

Canon Printer Setup Using IJ.Start.Canon

How to Reset Canon Printer?

How To Setup Canon Pixma TR4500 Printer

 

Step-By-Step Guide for IJ Start Canon G2010 Setup

The advancement in technology has manufactured a machine called a printer to print, scan and copy documents. Various features are available in the IJ Start Canon G2010 printer. If you are looking for multi-functional printers, then the G2010 series MP Drivers Ver.1.01 (Windows) Inkjet Printer can be a suitable choice for you. The printer is capable of generating sharp document print and impressive photo quality. Canon printers can print documents up to 7000 full-color sheets and 6000 black and white sheets. This multi-functional inkjet printer arrives with advanced technology and features which can be used as a flagship product for high-quality printing requirements. Canon Pixma printer is ideal for users to meet their business requirements or other printing tasks. This printer can print unlimited A4 sizes. Canon manufacture has designed a Pixma G2010 Inkjet Printer ink tank with an anti-spill bottle design. The recent development of Canon is to build a compact printer body to facilitate the user to center.

Features of IJ Start Canon G2010

Some features of the Canon G2010 printer are given below to troubleshoot the IJ Start Canon G2010 printer.

  • High-page yield ink bottles
  • Unified ink tank systems
  • The spill-resistant ink bottle design
  • Document and photo quality printing
  • New design panel for simpler operation

Methods to Configure IJ Start Canon G2010 on Windows?

A few steps are given below to set up the Canon G2010 printer on Windows.

Installation Procedure

  • Download the file
  • Then, do a double-click, and installation will continue automatically

Canon G2010 Scanner Driver

  • Suppose the operating system is upgraded and the scanner driver is installed, begin scanning after clicking the Scan button after updating. Reinstall scanner driver
  • Once the installation of the MP driver is restricted with the following actions, then install it again. This installation doesn’t complete after plugged in through a USB cable and switching on Power Supply again
  • Scan from Scan printer button doesn’t work if the connection is changed from a network to a USB connection. Install the MP driver again, and amend the connection method.

Methods to Set Up Canon Pixma G2010 Printer on Mac

Some troubleshooting steps are given below to configure Canon PIXMA G2010 Drivers Download on Mac.

Installation Procedure

  • Download the file
  • Tap double-click on the downloaded file and place it on a disk image
  • Do a double-click on the mounted disk image
  • Do a double-click on the packaged file in the folder. Installation begins automatically.

How to establish a printer with driver downloads

  • Access the IJ Start canon printer’s website for Canon PIXMA G2010 Drivers Download which matches your printing type. There are various drivers to ensure that you don’t select the wrong drivers on this website.
  • A downloaded driver is usually a WinRAR, so you need software Winrar to obtain the file. Do a right-click on the file and press extract here. Some files can be obtained in the folder as well.
  • Find the Setup File and then do a double-click on the file to begin the installation the process
  • Resume the system so that drivers are installed perfectly
  • Once you start your system, couple the printer with your system using the default cable to examine if now the computer can identify the printer.

For printers, use a wireless connection system. Confirm that you have switched on Wi-Fi and printer and your printer is already coupled to Wireless. Now, you can use your printer. You can also configure the printer wirelessly through a USB cable to connect with Mac.

FAQs

Ques. How can I modify default settings on my G2010 series MP Drivers Ver.1.01 (Windows)?

Ans. Some configuration steps are given below to modify the Canon printer.

  • Tap Start, then settings and press on printers and faxes
  • Choose properties after doing a right-click on the printer
  • Move to the Advanced tab
  • Press printing defaults option
  • Amend the Settings

Ques. How to configure Canon printer wirelessly?

Ans. Some steps are given below to sync the Canon printer wirelessly.

  • Tap the Power button to switch it on
  • After that, move to printer Home and press but don’t release the Wi-Fi button
  • Next, choose the LAN wireless set up option and click Ok
  • Select your Wi-Fi network.

Ques. What is a WPS button?

Ans. Wi-Fi protected set up is an advanced feature supplied with several routers. It is established to make the process of coupling on a secured wireless network from a system or other device easier.

Ques. How can I modify print settings?

Ans. Some steps are given below to modify print settings.

  • Enter devices into the main search field available at the bottom left of your screen
  • Choose devices and printers from result lists
  • Do a right-click on the appropriate print icon
  • Choose printing preferences
  • Tap Ok and then modify print settings
  • Now, the printer is ready to print documents.

IJ.Start.Cannon

Canon Inc is a Japan-based multinational corporation located with its head office in Tokyo, Japan. The company produces optical, imaging, and industrial products such as cameras, medical equipment, lenses, printers, scanners, and semi-conductors. Through Canon printer, users can print and scan their essential documents, gifs, pictures, etc. This printer has various advanced features to experience its customers with a smooth printing touch. It is manufactured and released in various printing models. To sync printers with your system, you have to install the Canon printer’s latest driver. Install printer driver according to your Canon printer model. Through printer driver, attach router or modem with appropriate access points to wirelessly connect your Canon printer. Users may face issues while working with the IJ Canon printer. To resolve problems in Canon, you must call the Canon customer support number to fix it quickly. To find various Canon printer models, you must visit ij.start.cannon, and you will get a list of various printers.

Essential Tips to Unbox Canon Printer and Hardware Setup

  • Canon printer is protected in a completely sealed box. Clear the box and take out the printer with cartridges, cables, etc.
  • Now, bring out the polystyrene packaging wraps and orange tapes. Remove the protective plastic from the display of your printer
  • Navigate the power socket on the printer. Attach the power cable to the printer’s port and the wall electrical outlet.
  • Turn on the printer by clicking the power button. Immediately, the printer display light will switch on
  • Now, insert the ink tanks. Remove the cartridges outlet seal and the plastic covering the cartridges
  • Remove the printer top cover, and the printhead carriage will automatically adjust at your place. Take all cartridges and keep them into corresponding slots.
  • Put the printer top cover, and the printer will make noise. It indicates that ink cartridges are successfully installed
  • After that, keep some pages in the paper tray. Remove the flap available at the rear of the printer, and gently take out the input tray
  • Put some papers in the input tray. Push the paper tray that properly settles back into place. It includes the hardware synchronization of your printer. Now move to ij.Canon.start printer for driver downloading.

Steps To Create A Stable Connection Between Your Printer and Computer

Link your Canon printers with the computer as you have downloaded the setup file through Canon’s official website. Two separate steps for establishing a connection that depends upon printer hardware specifications. Observe at two methods listed below.

  1. Wireless Setup

Suppose your printer is of modern technology, it has a feature of wireless connection. Associate your printer without any cable, move to wireless settings on your printer. Choose the Wireless LAN setup wizard and couple to the same wi-fi too which your system is paired.

  1. USB Connection

Suppose your printer doesn’t have wireless connections; utilize the USB cable for connection. The cable is coming with your printer. Inspect the cable carefully and look at the USB ports of both devices to ignore unwanted connection errors. Affix one end of the USB cable to the system and the other end to the printer.

Canon printers can be configured to your system through a wireless and wired connection. You must go through the above methods to sync your Canon printer to your computer.

FAQs

Ques. Which printer model is excellent in Canon?

Ans. Few best canon printer models are listed below.

  • Canon E4270 Printer
  • Canon Pixma G3000 Printer
  • Canon G3000 Printer
  • Canon TS207 Printer
  • Canon Pixma TS307 Printer
  • Canon G2012 Printer
  • Canon E477 Printer

Ques. Which printer is best for home use?

Ans. Three types of printers are best for home use.

  • HP OfficeJet Pro 9025e
  • Epson Expression Premium ET-7750
  • Canon Pixma TS9520

Ques. How to Identify Inkjet Printer?

Ans. The easiest method to know which printer you have is by opening your printer’s dialogue box. A maintenance or options tab is given in this window. If the button symbolized as nozzle check, print head cleaning or print head alignment is available, referred to as inkjet printer.

Ques. Does Deskjet printer represent Inkjet Printer?

Ans. Deskjet is the same as inkjet printers produced by Hewlett-Packard. Canon Printers range from small domestic to large industrial models. However, the largest model in the range has been dubbed as  DesignJet.

IJ Start Canon

Canon Printer is the most recognized prominent printer launched to perform various types of printing and scanning tasks. Canon printer includes a super tank producing various pages, and ink replacement is cost-effective for printing. Sometimes, all documents are not printed well, and the printer is working slowly. It means that the Canon printer needs repairing. Suppose you find out the primary causes behind such problems. After getting good reasons, you must look for some troubleshooting steps. Suppose you can’t find the best solution. In that case, you must take expert guidance by connecting with the Canon customer support team, and they will provide you with appropriate suggestions to rectify the issue.

The Canon Pixma G6020 is one type of IJ Start Canon printer recognized as an inkjet printer with cost-effective prices for bulk ink. Canon printer has an antiquated interface that lacks an automated document feeder (ADF) with multiple extraordinary designs. This feature makes the IJ Start Canon printer truly exceptional.

Steps to Download Compatible Printer Driver for Your Printer

Download Compatible Printer Driver for Your Printer

Some steps are listed below to download a compatible printer driver for your printer.

  • Switch on your computer and Wi-Fi. Now, open a secure internet browser to manage privacy against vulnerabilities. Select the best among Opera, Internet Explorer, Safari, Chrome, etc.
  • Through the ij start canon website, you can get suitable canon printer drivers for your printer. Type ij.start. Canon in the search bar and press Enter to access IJ Canon official website
  • Observe the Setup tab and press to access the product selection window. Hence tap the Setup option and go to the next procedure
  • Once it is found, you have to search your product model by entering its number or name in the search bar. Confirm that you have observed the correct printer by looking model number at the back of the printer. Then, tap Go
  • Look at the download window at Canon’s official website on your system. Do a double-check of the operating system and quickly change if there is a requirement to do so. Now, press the download button to install the software.
  • Moving to another window or any other application can slow down internet speed and even downloading process of Canon printer driver file. Once completed, save the file in a protected folder for your further reference.

Some Printing Errors and Their Rectification

Printing Errors and Their Rectification

Once the driver is configured in your system, you may encounter various types of issues to perform the printing jobs. Let’s go through some errors in the Canon printer and their solutions.

  1. No Paper on Canon Printer

No Paper on Canon Printer

Suppose your printer’s input tray is loaded full but still shows no paper or not printing; paper may get stuck in the rear tray. Switch off your printer, detach cables and remove blockage available in the input tray. Clean the paper feed roller after using a wet and clean cloth. If wrinkled or twisted paper, replace the paper with an accurate one. The size of the page must be compatible with the printing file for which you print. If page size settings don’t match with the file, it will not print. Such tips will absolutely resolve this problem in Canon printer.

  1. Bad Printing Quality

Bad Printing Quality

Sometimes, you need printing of your essential documents but receive spread ink spots, patches or faded paper, and horizontal lines. This problem mainly occurred due to dry ink and can be resolved by turning on the printer’s utility program. If ink cartridges contain a low amount of ink, you will get unclear printing papers. So, swap the ink cartridge with a new one. If the problem still exists, clean the print heads and then print a page.

Conclusion

After going through the above steps, you can resolve some errors in the Canon printer. To resolve all errors in the Canon printer, you must dial the Canon customer support number to get some appropriate tips.

FAQs

Ques. Do I need Wi-Fi to take print from my phone?

Ans. Suppose you don’t have a router or network to couple your phone; you can print directly from your mobile phone via Canon printers through Wi-Fi Direct or Canon Wireless Direct.

Ques. Is it possible to take print without using a computer?

Ans. A photocopy can be taken without a computer. You use a Personal Computer only for printing and scanning via printers. So, it’s possible to take print without using the computer. However, photocopy and printing are different jobs.

Ques. How can I take print from my phone via a printer?

Ans. Some steps are given below to make you learn about printing from a smartphone via a printer.

  • Access the file you would desire to print
  • Press the menu button available at the top right-hand corner with three-dots
  • Press Print
  • Press the drop-down arrow situated near the top of your computer screen
  • Click the printer from which you like to print
  • Press the print button.

Ques. Can I print from my iPhone?

Ans. Connect Air Print enabled printer to iPhone wirelessly to print documents, photos, gifs, etc., through the mail, apps, and gallery. Various applications available on the App store also support Air Print. iPhone and printer must be connected to the same Wi-Fi network.